How to determine the air temperature and humidity of the runner dehumidification unit

How to determine the air temperature and humidity of the rotor dehumidification unit? Answer: If there is no heat source in the room and no other wet source except the staff, take the intermediate value of the room as the final design goal, that is, the temperature is 22℃ and the humidity is 25% design. Considering the temperature rise of the blower 5℃, it is appropriate to check the relevant manual and that the air temperature is 17℃. After deducting the hourly moisture amount of human body, the moisture content of air supply should not be more than 3.8g / kg dry air.

As is known to all, dehumidification wheel as the core component of the wheel dehumidifier, the performance of the wheel and the type of adsorption material directly determines the dehumidification ability, especially used in lithium battery industry glove box or injection workshop double wheel low dew point wheel dehumidifier, often need to put the air dew point temperature down to-45℃ ~ 60℃, so the use of wheel all imported wheel Proflute. The cold source of the low dew point runner dehumidifier usually adopts the frozen water system. The fresh air pretreatment + the front cooling section is cooled and dehumidification, and then the low temperature saturated air is treated by the deep dehumidification of the runner adsorption. The heating method of regenerative air is generally 0.3MPa steam heating. In order to achieve ultra-low dew point, a lot of steam is often needed, and the consumption is amazing. The use of low-temperature regenerative hot water heating in the runner dehumidifier not only reduces the energy consumption, but also makes the whole system simpler and the operation cost is lower.